I Optik Auto Refractometer
- Home
- General Ophthalmology
- Auto Refractometer
- I Optik Auto Refractometer
I Optik Auto Refractometer
I Optik AR / ARK 910 Auto Refractometer is a computer-controlled machine used during an eye examination to provide an objective measurement of a person’s refractive error and prescription for glasses or contact lenses. This is achieved by measuring how light is changed as it enters a person’s eye.
The ARK-910 Auto Refractometer is a smart eye-measuring tool that uses 3D technology to focus and measure your eye automatically. It comes with a 7-inch screen you can touch to control it, an adjustable chin rest to fit different people, and a built-in printer.
You can measure your eyes by simply tapping the screen, no joystick is needed, and it’s very quick and accurate, giving results in 10 seconds. It also has special features for looking at the back of your eye and measuring the eye’s curvature on the sides.
The Auto Refractometer automatically determines the correction needed to place your “focus point” on top of the retina, the light-sensitive area at the back of the eye responsible for correctly processing images. The measurement taken by an Auto Refractometer can be translated into a prescription for eyeglasses.
We are an Importer, Wholesaler & Supplier of I Optik AR / ARK 910 Auto Refractometer in India.
ARK-910/AR-910 series
The ARK-910/AR-910 adopts 3D autofocus technology, which only needs simple guidance or confirmation to start the automatic focusing and measurement of the left and right eyes, equipped with a newly designed optical system, which can ensure the speed and accuracy of the measurement.
Intelligent Touch Operation
The required functions can be reached at one touch, and the corresponding functions can be accessed and realized through different touch methods.
Partition Control System
The newly designed double-zone control makes the fogging process and focus process independent of each other, ensuring the speed and accuracy of the measurement results.
One touch auto tracking and measurement
Double-click the screen or press the measurement button, it could carry out automatic eye tracking, focus and measurement, the whole process only takes about 10 seconds.
Retro-Illumination Image management
The Retro-Illumination image makes it possible to observe the opacity of the optical medium of the eye.
Keratometry Peripheral Measurement
Based upon the center of cornea, measure the curvature of part around cornea from the positions of up/down and left/right direction.
Tiltable LCD touch screen
7.0-inch touch screen with high-quality hinges, the screen can be adjusted and stably maintained at the desired angle.
Motorized Chin Rest
The height of the subject’s eyeball can be quickly adjusted through the touch screen or physical button before the measurement, and the motor runs smoothly and quietly.
Built-in Thermal Printer
High-speed printer with quick paper loading design, when replacing printer paper we just need to put the paper roll into the receptacle and close the cover, the receipt can be cut automatically after printing.
I Optik AR / ARK 910 Auto Refractometer Specification
| Refractive measurement | Sphere (S) | -25.00~+22.00D |
|---|---|---|
| (0.12/0.25D step) (VD=12mm) | ||
| Cylinder (C) | 0.00 ~ 10.00D (0.12/0.25D step) | |
| Axis | 0 ~ 180° (1° step) | |
| Pupil Distance | 10~85 mm | |
| Pupil Diameter | ф2.0mm | |
| Target Fixation | Auto fog system | |
| Corneal Curvature Measurement (ARK-910 model only) | Radius of Curvature | 5~ 10mm (0.01mm step) |
| Corneal Refraction | 33.75~67.50D(0.12/0.25D step) | |
| Corneal Astigmatism | 0.00 ~ 15.00D(0.12/0.25D step) | |
| Axis | 0~ 180° (1°step) | |
| Corneal Diameter | 2.0~12.00mm | |
| Other | Monitor | 7-inch Color LCD |
| Printer | Thermal Line Printer | |
| Interface | RS232/Bluetooth | |
| Power Saving Function | OFF/ 5/15 minutes | |
| Power Supply | AC100-240V, 50/60Hz | |
| Power consumption | 75VA | |
| Dimensions/weight | 262 (W) *467 (D) *487 (H) mm/17.2kg |
Authorization Letter
